10.0.0.0.1

192.168.100.1

The default IP address to access the admin panel to alter the WiFi password, SSID, and router settings is 192.168.100.1 (http://192.168.100.1). This is the default gateway address used by router manufacturers including TP-Link, NETGEAR, Huawei, and IndiHome.

How can I access 192.168.100.1?

To access the 192.168.100.1 admin panel settings, proceed as follows:

1. Launch your web browser.
2. Enter the address http://192.168.100.1 or 192.168.100.1.
3. The router’s login page will appear.
4. Type in the standard username and password.
   Login name: admin
   password (default router username and password list) or admin
5. Your login will now be successful.

• Note: Use caution when typing the IP address, as 192.168.l00.1 is frequently entered incorrectly. You will be forwarded to the incorrect location if you enter 192.168.l00.1 into the address box.

How can you modify your WiFi SSID and password?

To modify your router’s Wi-Fi SSID and password, follow these instructions:

TP-Link:

1. On a computer linked to the TP-Link Router, launch the web browser.
2. Visit http://192.168.100.1 now. The TP-Link routers’ login page.
3. Use the default login information to access your TP-Link router.
4. Go to Wireless > Wireless Settings after logging in.
5. To save changes, type in the new Wi-Fi SSID in the Wireless Network Name area and click Save.
6. Navigate to Wireless > Wireless Security.
7. In the Password field under the WPA/WPA2 Encryption section, type the new Wi-Fi password.
8. To save the changes, click Save.
9. The TP-Link router’s Wi-Fi SSID and password might be successfully modified.

NETGEAR:

1. Get your computer’s web browser open. (Ensure your PC is linked to the NETGEAR Router.)
2. fresh web browser window, and Put http://192.168.100.1 in the new tab’s address box and hit Enter.
3. Use the router’s default username and password to log in now. These are written on a label that is located on the router’s rear.
4. Navigate to Basic > Wireless after logging in.
5. In the Name (SSID) field, type in the new Wi-Fi SSID.
6. In the section labelled Password (Network Key), type the new Wi-Fi password.
7. In order to save changes, click Apply.
8. The NETGEAR Router’s Wi-Fi SSID and password would be modified.

Huawei:

1. On your computer, launch a web browser. Ensure that the IndiHome Huawei Router is linked to your computer.
2. Go to http://192.168.100.1 in a new browser tab.
3. The login page for Huawei routers is located here. Log in by entering your login information here.
4. Go to Settings > WLAN > WLAN Basic Settings after logging in.
5. In the SSID field, type the new Wi-Fi SSID.
6. In the WPA pre-shared key area, enter the new password.
7. In order to save changes, click Apply.
8. SSID and password would now be modified.

Forgot your username or password for 192.168.100.1?

Everyone has experienced forgetting their username, password, or both, which prevents them from logging in. You can easily retrieve your login and password if you’ve forgotten or lost them for 192.168.100.1, so don’t panic.

You would need to reset your router to factory settings in order to retrieve the forgotten username and password. Remember that any modifications you make will be undone.

• Take a paperclip or other sharp, pointed object.
• Look on the back of the router for a tiny RESET button.
• Using the needle or paperclip, press and hold that button for 10 to 15 seconds.
• Release the button after that. All settings, including any modified username and password, will be reverted to the defaults when the router reboots itself.